Woodcut's new articulated head hollowing tool. Comes with two links, the straight and the curved. The links are made from aircraft specification high tensile steel to ensure there is no flex. The tool will fit through a 15mm aperture, the shaft being 1/2" or 12.7mm diameter.

Handle available seperately.

Woodcut's new Twin Collet Handle. Used with the Flexi Hollower or the 10mm and 13mm single or double ended Pro-Tip gouges.This polished stainless steel tubular handle is fitted with two rubber grips and uses two sizes of collet to hold the the tools. For the Pro-Forme Flexi and the 13mm single or double ended Pro-tip Gouges the 1/2"(13mm) is used. The other 10mm collet is stored on a magnet in the bung in the base of the handle.

Designed for use with the Twin collet handle, these gouges have solid shafts and replacable Swedish high speed steel tips.

Designed for use with the Twin collet handle, these gouges have solid shafts and replacable Swedish high speed steel tips.

This little self propelled sanded head is a great addition to the Flexi Tool system. The cutter head is removed and the this is put in it's place, creating an articulating self propelled sander that will reach every nook and cranny inside your hollow forms.
It uses Tim Skilton "click in" sanding  arbors and has two sealed bearings. The 30mm arbor is standard but it will accept the 50mm and 75mm arbors as well, so you can use it just as easily on the outside. Due to the compact size of the head it will fit through a 35mm diameter opening.
It is used best with light pressure without deforming the shape of arbor, letting the abrasive do it's work.